When we are making cement plastic stone rockery, in order to cater to the more appropriate and beautiful environment, it is very important to color the cement plastic stone. Today, let's talk about the coloring process of cement plastic stone:
1. Background color: mix outdoor emulsion paint with clean water. Generally, one barrel of emulsion paint is mixed into two barrels. Maybe the tee can be used. It can't be too thin. It has no masking power and is not easy to color.
2. Dark color on the pointing: now the dark color on the pointing will generally be distributed with red, yellow and black, which is now separated from the black of the early years. The dark color and pointing cannot be dull with too deep color, and the progressive color must be considered.
3. Large surface coloring: it is assumed that the large surface is not a special requirement. We generally choose the color dominated by red and yellow. The induction can be appropriately heavier, perhaps a little concave, and other places can be appropriately lighter. Here, we should pay attention to the sudden change of color. We should not spray the same up all the time. It should be divergent and extensible. The most important thing is the on-site control and regulation.
4. Aging: after the color distribution is appropriate, you can sprinkle green or spray it to make moss color, or press it properly with light ink or ripe brown. Of course, it depends on whether it is needed on site.
5, sealing glue: in the early years, when the color is finished, the emulsion will be sprayed into the appropriate amount of water and sprayed onto the plastic surface to form a protective film, and there are also varnishes. Now, they usually take part in the process of color matching, so as to save the process of sealing the glue in the later stage and seal the glue better, instead of simply adhering to the appearance.